Paint

How many rolls of wallpaper?

Enter the room size and the wall height. The roll size is filled in for a standard roll; add the pattern repeat from the label.

How it is worked out

Wallpaper goes up in strips (drops) the width of the roll, so count strips, not square feet.

1. Go round the room: 2 × (length + width). 2. Divide by the roll width to get the number of strips. 3. Each strip is the wall height plus about 4 in to trim, rounded up to a whole pattern repeat so the pattern lines up. 4. Divide the roll length by the strip length, rounded down: that is how many strips one roll gives. 5. Divide the strips by the strips per roll, rounded up.

Example: a 13 × 11 ft room with 8 ft walls and 20.5 in × 33 ft rolls, no repeat: 48 ft round, 29 strips, 8.3 ft each, 3 per roll: 10 rolls.

Pattern repeat and spare rolls

The label gives the repeat, the height after which the pattern starts again. A large repeat wastes a lot: on an 8 ft wall a 24 in repeat makes each strip 10 ft instead of 8 ft 4 in.

Doors and windows are not taken off. The off-cuts above and below them rarely make a full strip, so they make up for the waste.

Check that every roll has the same batch number: colours can differ between batches. One spare roll is worth it for repairs.

Wallpaper rolls by room size

Room (ft)Walls aroundRolls
10 × 1040 ft8
10 × 1244 ft9
12 × 1248 ft10
12 × 1452 ft11
12 × 1656 ft11
14 × 1660 ft12
16 × 2072 ft15

Rolls of 20.5 in × 33 ft, which take three strips each on walls up to 10 ft high. No pattern repeat, and nothing taken off for doors or windows; a large repeat can add a roll or more, so use the calculator.

Worked example: why square feet underestimate

A 12 × 10 ft bedroom with 8 ft walls, papered with 20.5 in × 33 ft rolls (56 sq ft each).

By area: 44 ft round × 8 ft = 352 sq ft, and 352 ÷ 56 = 6.3, so 7 rolls.

By strips, as the calculator does it: 44 ft is 528 in, and 528 ÷ 20.5 = 25.8, so 26 strips. Each strip is 8 ft + 4 in = 100 in, and a 396 in roll gives 3 of them (3.96, rounded down: what is left is too short to hang). 26 ÷ 3 = 8.7, so 9 rolls.

The area method is 2 rolls short, because every roll leaves an off-cut of almost a whole strip. On these walls a pattern repeat of up to 32 in changes nothing: each strip rounds up to at most 131 in, and the roll still gives 3.

Mistakes to avoid

Measuring the height once: in older houses ceilings dip. Measure at each corner and use the highest.

Starting in a corner: corners are seldom plumb. Hang the first strip to a plumb line or a laser, about a roll’s width from the corner, and work outwards.

The wrong paste: paste-the-wall (non-woven) papers and paste-the-paper ones need different paste and soaking times. The symbols on the label say which.

Cutting all the strips first: with a drop or half-drop pattern, cut and hang one strip at a time and match each to the one before.

Questions

  • How big is a roll of wallpaper?

    In the US a standard (double) roll is about 20.5 in by 33 ft. A European roll is 53 cm by 10.05 m (about 21 in by 33 ft).

  • What if I only paper one feature wall?

    Enter a quarter of its width as both the length and the width (3 and 3 for a 12 ft wall): the calculator goes round a room, so the four sides add up to your one wall.