How it is worked out
The walls of a room are its perimeter times its height: 2 × (length + width) × height. A 13 × 11 ft room with 8 ft walls has 2 × 24 × 8 = 384 sq ft of wall.
Take off what you will not paint. The calculator takes about 20 sq ft for each door and 16 sq ft for each window. With one of each, 384 − 37 = 347 sq ft is left.
Multiply by the number of coats and divide by what one gallon covers. A typical interior paint covers 350 to 400 sq ft per gallon, so two coats take 347 × 2 ÷ 350 = 2 gallons. Add the ceiling if you are painting it too.
Getting the number right
Check the can. Coverage is printed on the label, and it varies more than you would think: a thick one-coat paint may cover 250 sq ft per gallon, a cheap thin one more on paper but needs a third coat.
Two coats is the usual answer. Plan on three when you paint a light colour over a dark one, cover bare plaster or drywall (prime it first), or use a bright red or yellow, which hide poorly.
Textured and porous walls drink paint. For brick, rough plaster or new drywall, lower the coverage by a fifth.
Buy one can more only when the shade is mixed for you: a second batch can come out slightly different. Leftover paint keeps for touch-ups if the lid is sealed.
Paint for common room sizes
| Room (ft) | Wall area | Paint, 2 coats | 1 gal cans to buy |
|---|---|---|---|
| 10 × 10 | 283 sq ft | 1.6 gal | 2 |
| 10 × 12 | 315 sq ft | 1.8 gal | 2 |
| 12 × 12 | 347 sq ft | 2 gal | 2 |
| 12 × 14 | 379 sq ft | 2.2 gal | 3 |
| 12 × 16 | 411 sq ft | 2.4 gal | 3 |
| 14 × 16 | 443 sq ft | 2.5 gal | 3 |
| 16 × 20 | 539 sq ft | 3.1 gal | 4 |
| 20 × 20 | 603 sq ft | 3.4 gal | 4 |
8 ft walls, one door and one window taken off, paint that covers 350 sq ft per gallon. Walls only, not the ceiling.
Questions
How much paint do I need for a 12 × 12 room?
With 8 ft walls, one door and one window: 2 × 24 × 8 = 384 sq ft, less 37 for the door and window, is 347 sq ft. Two coats at 350 sq ft per gallon take 2 gallons.
How many square feet does a gallon of paint cover?
Usually 350 to 400 sq ft for one coat on a smooth, primed wall. The can says what it covers; rough or new surfaces take more.
Should I subtract doors and windows?
Yes for large ones; it can save a can in a room with a lot of glass. The calculator does it for you; set them to 0 to leave them in.
Can I use it in metres and litres?
Yes. Switch to Metric: lengths in metres, coverage in square metres per litre (6 to 10 is typical; the tin says) and the can in litres.
Which calculator do I need?
Six calculators, one for each job: paint, tiles, flooring, wallpaper, concrete, and gravel, sand, topsoil or mulch. Each works in feet and inches or in metres, shows the answer as you type and the working step by step.